Solar Charge Controller SmartSolar Victron MPPT 75/10
Description
Solar chargers collect energy from your solar panels and store it in your batteries. Using the latest and fastest technology, SmartSolar maximizes this energy harvest, intelligently managing it to reach the maximum load in the shortest possible time. The SmartSolar takes care of the health of the battery, extending its useful life.
Technical characteristics
INTEGRATED BLUETOOTH SMART: NO BACKPACK NEEDED
The wireless solution to configure, monitor and update the controller with an Apple or Android smartphone, tablet or other device.
VE.DIRECT
For a wired data connection to a Color Control panel, Venus GX, PC or other devices.
ULTRA-FAST MONITORING OF THE MAXIMUM POWER POINT (MPPT).
Especially with cloudy skies, when the light intensity changes continuously, an ultra-fast MPPT controller will improve energy harvesting by up to 30% compared to PWM charge controllers, and up to 10% compared to older MPPT controllers slow
LOAD OUTPUT
Over-discharge of the battery can be prevented by connecting all loads to the load outlet. This output will disconnect the load when the battery has discharged to a preset voltage.
A smart battery management algorithm can also be set: see BatteryLife.
The load output is short-circuit proof.
BATTERYLIFE: INTELLIGENT BATTERY MANAGEMENT
If a solar charge controller is not able to recharge the battery to full capacity in one day, what happens is that the battery cycle continuously changes between the "partially charged" and "final discharge" states. This mode of operation (without periodic full recharging) will destroy a lead-acid battery in weeks or months.
The BatteryLife algorithm will monitor the battery's state of charge and, if necessary, will increase the load shedding level day by day (that is, it will disconnect the load earlier) until the collected solar energy is sufficient to recharge the battery. up to almost 100%. From that point on, the load shedding level will be modulated so that a nearly 100% recharge is achieved about once a week.
PROGRAMMABLE BATTERY CHARGING ALGORITHM
See the Support and Downloads> Software section on the Victron website
DAY / NIGHT TIMER AND LUMINOSITY REGULATOR OPTION
See the Support and Downloads> Software section on the Victron website
PROGRAMMING AND VIEWING OPTIONS OF THE HISTORY AND REAL-TIME DATA
- Modern Apple and Android smartphones, tablets, macbooks and other devices
- ColorControl panel
Downloads
Solar Charge Controller SmartSolar Victron MPPT 75/10 |
|
Documentation |
|
Data sheet
Data sheet
- Power
- 12V/145W, 24V/290W
- Voltage
- 75V
- Type
- LEDS
- Weight (Kg)
- 0,5Kg
- Size
- 100x113x40mm
- Amps
- 10A